2017年08月07日

BMW ICOM A and A2 Firmware



if you bought ICOM A or ICOM A2 interface from china car diagnostic tools supplier, as you know, it is sometimes necessary to update the ICOM A2 or ICOM A Firmware to latest vrsion, Where can i get ICOM firmware update file. and how to update icom A firmware by Step. Is there any known FAQ in the web available or is this simple learning by suffering? here, we share the Update Steps and Note for Chinese or original ICOM A and ICOM A2 Firmware

we collect 10 Steps firmware update:

1). Use your cable and connect ICOM to port

2). Power ICOM by 12V power adapter or from 1x DLC

3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502

4). Click "Update Firmware",and you can find the version of firmware.

5). Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM",
click "Send the file"

6). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED

7). When it will say "The SYSTEM IMAGE update was successfull",
click "Update Firmware"

8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION",
click "Send the file",the file is big so it will take some minutes to finish have patience.

9). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED again

10). When it is ok, click "reboot".

Important Note for ICOM Firmware upddate:

1. Setting up your computer to obtain an IP address automatically
2. Firstly choose the smaller file “ICOM-BootImage-01-13-00.bin” , then set image type to SYSTEM;
Secondly choose the bigger file “ICOM-ApplicationImage-01-18-00.bin”, then set image type to APPLICATION.



if you need BMW ICOM A or ICOM A2 latest firmware bin file, pls contact with us



この記事へのトラックバックURL

http://obd2.fukuokablog.jp/t12570
上の画像に書かれている文字を入力して下さい