2019年03月29日

Lonsdor K518ISE

A quick demonstration of Lonsdor K518ISE programming key for 2005 Ford Focus in two minutes. And for more auto key programming,check hereautomotive key programming cases.
lonsdor-k518ise-key-programming-on-a-ford-focus-1
This is the Ford with this key the HP 100 101, sorry not the Tibbe key.
lonsdor-k518ise-key-programming-on-a-ford-focus-2
lonsdor-k518ise-key-programming-on-a-ford-focus-3
It’s very simple to use Car Key Programmer Lonsdor K518ISE.
You see there is a range of other things but we’re just doing this key today.
lonsdor-k518ise-key-programming-on-a-ford-focus-4
So just show you the original key is this one and when you put that in the ignition, turn the ignition on and this light here that’s currently, flashing will go solid and then go out that shows that the system’s working.
lonsdor-k518ise-key-programming-on-a-ford-focus-5
lonsdor-k518ise-key-programming-on-a-ford-focus-6
The new key is this one, it’s been cut ready, switch the ignition on and you see that light goes just flash basically, so it’s not programmed yet.
lonsdor-k518ise-key-programming-on-a-ford-focus-7
lonsdor-k518ise-key-programming-on-a-ford-focus-8
So, go to “Immobilizer“.
lonsdor-k518ise-key-programming-on-a-ford-focus-9
There is a nice search function at the right corner of the machine.
Type F and choose “Ford”, then “China”.
Yes, it does say China, but I’ve tested it quite a few times there’s name of Europe, South America, and anything else, it’s just China here, but it does work under that, so we are gonna go for China.
lonsdor-k518ise-key-programming-on-a-ford-focus-10 lonsdor-k518ise-key-programming-on-a-ford-focus-11 lonsdor-k518ise-key-programming-on-a-ford-focus-12 lonsdor-k518ise-key-programming-on-a-ford-focus-13 lonsdor-k518ise-key-programming-on-a-ford-focus-14
We will see that years the classic focus’s, tap “Type 2”, then “Immobilizer”.
Tap “Add key”, then get message “Downloading application”.
lonsdor-k518ise-key-programming-on-a-ford-focus-15 lonsdor-k518ise-key-programming-on-a-ford-focus-16 lonsdor-k518ise-key-programming-on-a-ford-focus-17
Read message ” Connect device (Lonsdor K518) OBD test cable with the vehicle OBD port, switch ignition one.”, tap “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-18 lonsdor-k518ise-key-programming-on-a-ford-focus-19
Please insert the new key to be programmed. Note: It needs two right keys to start vehicle.
So we are in a certain new key to be programmed which is this new one here, so press “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-20 lonsdor-k518ise-key-programming-on-a-ford-focus-21
Identified number of programmed keys in car:2, select “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-22
Programming, please wait…
lonsdor-k518ise-key-programming-on-a-ford-focus-23
Programming complete, successfully programmed key count (2).
lonsdor-k518ise-key-programming-on-a-ford-focus-24
So I’m going to test out because that should have jumped up to free rarely.
Just ignition on, insert back to see if the light goes solid and goes out.
So that’s goes solid and goes out, the key is programmed.
lonsdor-k518ise-key-programming-on-a-ford-focus-25

lonsdor-k518ise-key-programming-on-a-ford-focus-26

And going to check another one, insert into the ignition and to see if the light goes solid and goes out, then the key is programmed successfully.
So they both work. So when it says keys programmed to it must have meant the new key count will be too, so there must have just been just this one key programmed at the time and the other key is gonna be this one the new one. To me that should say free, but it works, the both start the car. So we’re gonna do is pop the key in just test it turn the ignition on, might go solid and goes out, means it’s gonna work it’s a neutral, start the car.
So Lonsdor K518 programmer takes literally less than two minutes to program the key.
lonsdor-k518ise-key-programming-on-a-ford-focus-27 lonsdor-k518ise-key-programming-on-a-ford-focus-28 lonsdor-k518ise-key-programming-on-a-ford-focus-29
CnAutotool.com Official Blog All rights reserved Lonsdor K518ISE programs 2005 Ford Focus key in two minutes
  

Posted by luzey88 at 22:29Comments(0)TrackBack(0)

2019年03月26日

Volvo 88890300 Vocom



Volvo 88890300 Vocom Interface can work with old and new Volvo heavy duty, supports j1708 and j1939, can perform programming etc, Vocom can diagnose Volvo Penta that Volvo VCADS Pro 2.40 can’t.

Volvo VCADS Pro 2.40 is for diagnosing the old Volvo trucks, supports j1708 protocol.

And more below:

Workable vehicle models:

Vocom: Volvo/Renault/UD/Mack Truck

VCADS: Volvo truck

Operation system:

Vocom: requires windows XP/ window7 32bit

VCADS requires windows XP

Info:

How to Install Volvo PTT v2.03 Software with Vocom interface

Laptop required:

Vocom has no limitation on laptop

VCADS can only be supported by Dell 630

Reliable Source of:

Volvo 88890300 Vocom Interface

Vocom-01
  

Posted by luzey88 at 14:53Comments(0)TrackBack(0)

2019年03月25日

Lonsdor K518ISE.

Used to read pin codes for 2014 Jeep Grand Cherokee using Lonsdor K518ISE.

But now i cannot read the pin.

this is the version able to read pin from Grand Cherokee

l(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -1

but now it cannot…

forced to update sw

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -2

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -3

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -4

nothing changed

the machine device info (id, sn)

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -4 (Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -5 (Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -6

i check alk immo0

nothing as smart 453

immo4 immo5 all
(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -6

go to the trial apply in the main interface

Trial apply it’s only 90 days

so, now, everything is clear.

In Lonsdor K518S, menus are divided into two parts:

free menus and subscribed menus.

Free menus are free for lifetime.
Subscribed menus can be used for free for 90 days.

You need to pay for them after the trial period. After the trial period, subscribed menus will not work properly if you don’t pay. And the menus will disappear after updating the device.
A. 365 days is a period and the price is USD600 per period. One year period starts from the day of the trial period finished.
B. Purchase menus with a dealer. You can use the menus normally and permanently after payment.
C. Menus which you purchase includes subscribed menus that have been released and that will have been released in one year period.
D. Subscribed menus beyond one year period requires extra payment.

after 90 days’ trial period, click check for updates in one key update, you can use subscribed menus for an extra 90-day period  

Posted by luzey88 at 16:32Comments(0)TrackBack(0)

2019年03月24日

Autel Maxisys Pro MS908P


Problem description:

On Autel Maxisys Pro MS908P or Maxisys Mini, the network connection is fine, but when going to Update page, it says “Network not available, please check the network”.

Solutions:Autel Maxisys MS906

1 Enter Root Explorer/mnt/sdcard/scan/menu and check if there is “init.xml” file. If there is the file, just delete it. Then enter the menu again to make sure if it is deleted successfully.

2.If the network is still not available, please select the Maxisys icon on the main screen. Then hold it and move it to the top where you can see App info, force stop the process of Maxisys and clear the data. Then try to update again.

If cannot solve the problem, send S/N to Autel engineer to check if the scanner is genuine.

Besides, update server is OK, please try to update it again with stable network connection.

Problem description:

When I use the Autel MaxiSys mini MS905, the error message “Unfortunately, maxisys has stopped” on the table.

Solutions:

Just try the following steps:

1 Connect Maxisys mini to PC via USB cable.

2 Turn on USB storage on the msxisys.

3 Wait for several seconds and turn off USB storage.

4 Restart the scanner and try again.
Autel MaxiSys pro MS908P 1 Autel MaxiSys pro MS908P 2 Autel Maxisys MS906
Autel Tools Autel MaxiSys mini MS905, Autel MaxiSys MS908 PRO, Autel MaxiSys MS908P, Autel MaxiSys Pro, Autel Maxisys Pro MS908P, Autel MS908 PRO, Autel MS908P, Autel MS908S PRO, maxisys ms908 pro j2534, maxisys ms908p, Maxisys MS908SP, MaxiSys Pro, MS908 PRO, MS908P, MS908P Pro, MS908S PRO   

Posted by luzey88 at 19:37Comments(0)TrackBack(0)

2019年03月24日

FVDI2


Test report: successfully added a 3-button key card to a Renault Megane III year 2009 using FVDI2 full abrites commander.

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -12

Original key card:

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -13

New key to be programmed

Step 1: Read Pin Code

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -1

fvdi-renault-megane-3-2009-1-1

Choose Key Learning function-> model Megane III X95 2009+

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -2

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -3

Press Start in menu to read key information

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -4

Then Read PIN Code

This is a Megane III, put the key card in ignition lock without starting engine

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -5

Read Pin Code success

Step 2: Learn key with FVDI Renault

Press Learn function

Enter number of keys to be programmed: 2

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -6

Press OK to continue

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -7

Insert key 1 into ignition lock and switch ignition to ON position

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -8

Then insert key 1 and turn ignition to ON position

Key learning in process

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -9

Press OK to save key learning result.

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -10

Turn ignition OFF and then ON

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -11

Key learning success

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -14

Test both keys. Both keys can start car.
Who Viewed This Article Also Views:

1 FVDI2015 FVDI2016 Locked LED Off Softdog Blink Solution
2 FVDI 2018 Full Software Download and Installation
3 FVDI2 Program A New Key on Audi A6 BCM2 When All Keys Lost
4 How to Add VW Touareg PCF7945 Dealer Key with FVDI Clone
5 FVDI 2018 Change Mileage Jetta VDO Instrument
  

Posted by luzey88 at 18:53Comments(0)TrackBack(0)

2019年03月21日

VXDIAG Subaru


VXDIAG Subaru SSM-III Software Version: V2018.04, Support SUBARU Till Year 2018 , it support program new keys , and there have some details as bellow :

Tip and review 1: SSM was the only thing that would program the prox fobs

It is a bit different from most. I make and program keys for a living and for a while the SSM was the only thing that would program the prox fobs. Not true anymore but I still paid less for the VXdiag with software than I would for a single piece of software for my T-code pro. . and there are 3 for Subaru. I have one which only covers the earliest models.



Tip and review 2: SSM talk to everything on the car incl. immo

I have bought SUBARU SSM-III from CNAUTOTOOL , I find it useful as it will talk to everything on the car, including immobilizer systems. . . it emulates the SSM3 and uses cracked SSM software (which is why it’s such a pain to set up). It is *extremely* picky about OS. I wound up having to buy a new(ish) laptop running win7 to get it going. Wouldn’t work with XP or 10.



Tip and review 3: need an immobilizer code to program keys/fobs

You have to have a NASTF LSID or be very good friends with a Subaru parts manager.

You need an immobilizer code (which is VIN specific) to program keys/fobs. It does not change so once you have it for your car you can go nuts. Odds are your dealer would probably give you YOUR immobilizer code if you shop there somewhat regularly. They may charge you for it as I know they have to pay a couple of bucks to mama subie for them.

There’s also an ‘enabling password’ which is also static and I suppose is a very flimsy extra layer of security to protect the immobilizer features of the SSM. It’s 3781.



Tip and review 4: need a code from the dealer

It definitely does more than a regular scanner.

It just depends on if you think having complete access to all the systems in the car is worth it. It’s nice to have when I need it. I had a VDC code that was for the steering angle sensor. Rather than go to the dealer, I just busted out the knock off SSM and calibrated it in the driveway.



More details for your reference :

When you do have a key, there are a variety of ways to program your key fob which are Subaru model specific. In one example, you have to use your lock/unlock buttons on your driver’s side door to input a serial number located inside of your key fob. In another, you have to insert your key in the ignition and turn it on and off before pressing the buttons on your key fob. These sound really simple. But there’s a huge catch. Most of the newer Subaru models can’t be reprogrammed from home. That’s because many of the new Subarus have a proximity key, push button start, and don’t actually use a key at all.

All of these DIY methods require the skill and know-how before you start the process, because they all have to be done very quickly once you start. In the first example, you have to input the serial number using the lock and unlock buttons on your driver side door within 30 seconds of beginning; the serial numbers are about 8 digits long. Then you have to input it again. If the first number is “4” you would press: lock-lock-lock-lock, unlock, and then move on to the next number. So if the first 3 numbers are “412” you would press: lock-lock-lock-lock, unlock, lock, unlock, lock, lock. Though this seems simple, you have to do it exactly correctly two times in a row, within 1 minute total. Talk about stressful!

In the second example, you have to turn your key from the “off” to “on” position in your ignition 10 times within a matter of seconds. Sometimes just turning it to the “on” position to get going down the road is a challenge. All of these methods are only possible on older Subaru models that utilize a key, don‘t have a proximity key, and don‘t have complex technology systems like automatic lift gates.

If you have the patience for any of these methods, there are online tutorial for your specific make and model. Google will help you a lot.

Any interesting for our product , welcome to contact us on www.cnautotool.com

Thank you
  

Posted by luzey88 at 19:02Comments(0)TrackBack(0)

2019年03月20日

Caterpillar SIS

You can install cat sis software following next steps.

1.Unzip iso,find SIS file,install setup.exe
2.Load iszwith virtual drive (Alcohol 120%),and install
3.Load isz,and install
4.Load isz,and install
5.Unzip sis_patch 123file,password is 123,Copy and paste the unzipped files to the SIS installation catalog.(Find SIS on desktop,click right key-file location)
6.Double click SIS icon,prompt to activate.
7.Unzip sis_kg 2013calculator,activate it.
8.Open SIS after activation,first it need load license,put yogocat masterin the desktop,find import user on SIS page.Then load.Choose the file yogocat master ,click √,click import,after jumping interface,click login.
9.Put ID and password to log in.ID:yogocatPASSWORD:master,next page choose cat dealer,agree with it,then you can open SIS homepage.
  

Posted by luzey88 at 18:24Comments(0)TrackBack(0)

2019年03月12日

CaterpillarSIS CAT SIS201805

Caterpillar SIS (CAT SIS) 2018 is illustrated a guide to the maintenance and repair of the full range of CAT vehicles, contains guidance on repair equipment and machinery Caterpillar, program help diagnose production Caterpillar, operating instructions spare parts and equipment Caterpillar.

Repair manual Caterpillar SIS 2018 is intended for engineers and will be useful to all interested in the given direction.

E-program CAT SIS Web allows the owner of specialized equipment to quickly and easily find the required information about the machine because it contains a search function references; helps professionals to calibrate equipment Caterpillar, diagnose it and troubleshoot equipment to solve any problems.

We’re getting a lot of questions about how to work with the CAT SIS

It’s simple and convenient for use. All you need to know is your model name, or serial number, or prefix. Also, you can use Parts search function.

Caterpillar Service Information System is a completely offline product, no matter it works using Internet Explorer Browser (You connected to the local web server, which is being installed on your own PC/Laptop). The technical database for all CAT machinery stored on 19 DVD-DL discs or (iso images or these DVDs). The total file size of CAT SIS setup + Database files is around 100 Gb.

Download / Setup / Activation of CAT SIS 2018

1. Please check that your HDD have enough of free space. We recommend at least 150 Gb for Download and 50 Gb if you prefer get CAT SIS on USB HDD or as a set of DVDs

2. The CAT SIS works only under Windows 7/8.1/10 operation systems. Mac OS, Linux, etc are not supported.

3. Internet Explorer 9-11 is the only Supported browser, because application using WinDjView image plugin, which works with IE only.

4. Setup process estimated time is 1.5 hours if the download and extraction of the setup files have been finished.

5. We recommend to use our Free remote Assistance with Download, Setup and activation. However, if you want to set up the app by yourself, we can send you details instruction guide.

6. If you need to install Heavy Duty Truck diagnostic Scanner CAT SIS on more then 1 PC/Laptop, please contact us, we have some good news for you!

Company Caterpillar – the world leader in construction and mining equipment, diesel and natural gas engines and gas turbines.

The Cnautotool.com also is a leading provider of services provided through the company’s Caterpillar Financial Services, Caterpillar Remanufacturing Services, Caterpillar Logistics Services and Progress Rail Services.

For more than 80 years, Caterpillar Inc. promotes progress possible and driving positive and sustainable change on every continent.
  

Posted by luzey88 at 22:31Comments(0)TrackBack(0)

2019年03月09日

MB SD Connect C6 Benz Scanner

VXDIAG MB SD Connect C6 Benz Diagnostic Tool MB Star C6 Multiplexer With DOIP Functions And V2018.9 MB Star C6 Download Software

VXDIAG MB Star C6 Multiplexer features with same functions as Original Mercedes Benz Xentry diagnosis VCI. MB SD Connect C6 Benz Diagnostic Tool With DOIP and AUDIO Function Better than MB STAR C4/C5. Cnautotool.com VXDIAG MB Star C6 Multiplexer MB SD Connect C6 Benz Diagnostic Tool With DOIP Functions And V2018.9 MB Star C6 Download Software.

VXDIAG MB Star C6 Mercedes Benz Xentry Diagnosis VCI Original MB SD Connect C6 Benz Diagnostic Tool with DOIP&AUDIO Function Perfect replacement MB STAR C4/C5

VXDIAG Benz Star C6 for Xentry diagnosis vci from cnautotool.com highlights:

1.Also called Star C6 Multiplexer, MB Star C6 VCX interface supporting MB Star C4, SD C5 function, performing diagnosis, repairs, program electric and electronic on-board vehicle systems.

2. VXDIAG MB Star C6 Mercedes Benz Xentry Diagnosis VCI from cnautotool.com Support DoIP, cover more functions during SCN Coding than SD C4/C5. Even can turn on hidden features.

3. Same Star Diagnostic & programming (SCN Coding) functionas ORIGINAL DIAGNOSIS VCI

Allow to pay to add any of these car brands: GM, Ford, Mazda, Toyota, Honda, LandRover, Jaguar, Subaru, Volvo, VW and For Porsche

vxdiag Benz Star C6 for Xentry diagnosis Details

Version:

V2018.9 MB Star C6 Download Software from cnautotool.com, it means works with the Mercedes Benz & Smart cars up to 2018 year.

VXDIAG Benz C6 Mux from cnautotool.com Languages:

22 languages in total.
  

Posted by luzey88 at 14:22Comments(0)TrackBack(0)