2018年12月27日

Why buy MB SD C4

MB SD Connect Compact 4 supports reading & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. MB SD Connect Compact 4 supports wireless diagnose, support K-line,CAN BUS and UDS protocol, ,fit all computers,with multi-language.



Top Reason to buy this MB SD Connect C4:

1.Support Wireless and Wire Connection

2.Software Version: 2018.12 Win7 system

3. Supported Multi-Language: Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/ Turkish/Czech/German/English/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese

4. Support mb Cars After Year 2000

5. The quality is the best and it can work stable.


New MB Compact 4 Features

1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose;

2. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it;

3. Multiplexer now use Lan cable to connect

4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;

5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;  

Posted by luzey88 at 23:32Comments(0)TrackBack(0)

2018年12月24日

AUTEL MAXISYS MS906 Features

Advantages:
1.Compatiable for diagnosis for part of the original software
2. Update: 2 Years free Online Update. (Free for One Year but we will buy another year for you, it means that you can get two years free update, which helps you save 700USD)
3. Android 4.0 Operating System for fast boot-up and multitasking
4.Can support wifi. It can update online via wifi,but can not connect the diagnose interface via wifi.

AUTEL MAXISYS MS906
Features:
1. Hardware
Extraordinarily powerful Cortex-A9 quad-core processor
8” 1,024x768 LED-backlit glossy Multi Touch capacitive display with IPS technology
Internal reliable and fast 32GB Solid State Drive for better performance
Built-in 5-megapixel rear camera with autofocus and flashlight
Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
Unique shop tough ergonomic design features strong rubber protection and housing;
Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
USB, audio and auxiliary ports make it easy to connect accessories
The VCI connects to the main unit wirelessly with up to 230 meters working range

2. Software
Open source Android Operating System for fast boot-up and multitasking
Easy and intuitive navigation makes finding what you need simple and fast
Extensive vehicle coverage for more than 80 US, Asian and European vehicle makes
Complete capabilities for codes, live data, actuation tests, adaptations
Displays live data in text, graph, analog and digital gauge for easy data review and analysis
Configures display options, sets triggers, records and playbacks results with one touch
Records and playbacks live data to pinpoint troubles of sensors and components
Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
Remote technical support for convenient demonstration, training and increased customer satisfaction
Prints out recorded data anytime and anywhere with Wi-Fi technology
Automatic Wi-Fi updates available in new software releases
Operating System

Specifications:
Operating System AndroidTM 4.0, Ice Cream Sandwich
Processor Samsung Exynos Quad-Core Processor 1.4GHz
Memory 2GB RAM & 32GB On-board Memory
Display 8 inch LED capacitive touch screen with 1024x768P resolution
Connectivity Ethernet: RJ45 Ethernet Connection,Cellular: 3G/4G module: WCDMA
Camera (rear) Rear-facing, 5.0 Mexgapixel, AF with Flashlight
Sensors Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input/Output Microphone, Dual Speakers, 4-Band 3.5 mm stereotype/standard headset jack
Power and Battery 11000 mAh 3.7 V lithium-polymer battery, Charging via 12 V vehicle power
Input Voltage 12 V (9-24 V)
Power Consumption 6.5 W
Operating Temperature -10 to 55 ℃ (14 to 131 ℉)
Storage Temperature -20 to 70 ℃ (-4 to 158 ℉)
Housing Strong plastic housing with protective rubber boot
Dimensions (W x H x D) 300 mm (11.81”) x 220 mm (8.66”) x 50 mm (1.97”)
Weight NW: 1.42 kg (3.13 lb), MaxiSys GW: 8.655 kg (19.08 lb) / MaxiSys Pro GW: 8.052 kg (17.75 lb)

For more information about AUTEL MAXISYS MS906 , please visit our website: CnAutotool.com  

Posted by luzey88 at 20:11Comments(0)TrackBack(0)

2018年12月19日

CAT Caterpillar ET


As a excellent obd2 solutions,Heavy Duty Diagnostic CAT Caterpillar ET Diagnostic Adapter features a potent function.it not just can Show “Logged Occasion Codes” to show engine more than speeds,Higher temperatures, fuel consumption but also can view ECM’s existing configuration and adjust user settings,perform diagnostic tests and calibrations, and calibrate.Electro-mechanical and electro-hydraulic elements .

Is the Cat Comm III compatable using the computer software Heavy Duty Diagnostic CAT Caterpillar ET 2018A Is this an actual caterpillar portion or even a knock off? Thanks.Yes, this is really the genuine CAT adapter, It’s also the ONLY advisable adapter for CAT ET, but obviously other ones will perform. It will function fine for the version you may have, and 2011C is actually the newest version.

What exactly is the distinction between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit perform with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks. CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines – Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.

Does this operate with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.If those Professional Diagnostic Tools use CAT Electronic Technician (CAT ET) for the application, it’s going to perform. Can the cat communicate 3 also be used to read detroit and cummins engines if I have the correct software? Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.

More similar items can be found on www.cnautotool.com and any problem please feel free contact us.

  

Posted by luzey88 at 14:57Comments(0)TrackBack(0)

2018年12月12日

Lonsdor K518ISE

Lonsdor K518ISE Key Programmer customer feedback us today:

Test in vw amarok, program key done, kms done !

mini cas3 done, all key lost bmw 540 cas2 japon model done. volvo xc60 done

reset G immobox done, immobox vw read pincode ok but no car key programmer

2005 Renault Scenic 3 button card key. Key was coded within 1 minute without the need to enter a pin code.

2007 Suburu Impreza. ID62 chip coded using System 1

2007 Nissan Qashqai. took me 5 minutes to code remote key. Would have taken less if I didn’t have to go through the

different systems before device communicated properly. The pin was automatically generated and entered buy device. see

photo All European Cars

Customer ask question:

Q:When test K518ise need connect internet?
A: No need connect interent, Only when update or do Toyota smart all keys lot(make keys) need connect internet.  

Posted by luzey88 at 14:32Comments(0)TrackBack(0)

2018年12月09日

MB Star C5


Everyone who has used or is using the MB Star Compact 4 currently must know that though this equipment is near perfect, but there is some accidental problems usually happen to it during the programming process. For this, its new generation MB Star Compact 5 car diagnostic tool is developed. However, compared to its last generation MB Star Compact 3, MB Star C4 is still more functional and compatible. The followings are some advantages C4 has over C3 as well as some disadvantages of C4.

During the common operation or programming process, the crashes may usually caused by the overheat of the interface of C4, and the suspend may occur as a result of it. Aimed at such disadvantages, the new generation C5 is developed to ensure the stability of the operation as well as the programming process, so as to bring a better user experience to the uses. But beyond that, the other functions of benz c4 and C5 are the same.

The users who have used both C3 and C4 ever before must know that the MB Star Compact 4 car diagnostic does have many advantages over C3. For instance, the C4 supports more languages like Portuguese, Danish, Finnish and so on; C 4 supports K L diagnosis, 3-line CAN BUS, UDS protocol (UDS protocol ensures the software upgrade of C4); C4 supports more computers because of its wireless diagnosis and wired connection.

So, these are the comparisons between C4 and C3, MB Star Compact 4 and C5, and you may know more clearly about your needs after reading them. And, considering of your needs and budget carefully before selecting these tools. If you are a Benz owner who likes to do DIY works with the car detection tool and doesn’t plan to purchase any upcoming Benz cars in the future, MB Star C4 is good enough to use for the current cars.  

Posted by luzey88 at 18:47Comments(0)TrackBack(0)

2018年12月05日

CAT Caterpillar ET advantages

CAT Caterpillar ET Diagnostic Adapter is PC-based diagnostic device for CAT Large Cars and Engines. CAT ET 2018A helpprovider experts to reprogram ECMs, reconfigure control program parameters and so on. In advance of working with this CatConversation Scanner, you have to set up CAT Caterpillar ET Diagnostic Adapter USB Push.

Top 5 Reasons To Get CAT Caterpillar ET Diagnostic Tool Adapter III
1. Latest Version:2018A
2. Supported Operating System: windows XP, Windows 7 32 bits
3. After install the software , we will active the software 2018 version for you by remote .
4. Supported Language: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
5. Support All cars of CAT


CAT ET Diagnostic Software
is multi languages Car diagnostic Interaction Scanner for trucks and weighty duty. Cat Conversationadapter ii allow to obtain Digital Command Modules (ECMs) from a personal laptop or computer.Cat et is Caterpillar Car or truck interaction Adapter, Caterpillar vehicles Diagnostic device. Caterpillar et application 2012B is on the market to multi-languge. Caterpillar et enable services professionals to reprogram ECMs, reconfigure management method parameters.

All in all, with this Caterpillar Diagnostic Tool you will discover three benefits:
1.Procedures ensuing in reduce device operating and maintenance costs.
2. Checks are offered like cylinder cutout and injector
3.Activation force to make dilemma finding easy.  

Posted by luzey88 at 22:09Comments(1)TrackBack(0)

2018年12月04日

Scania VCI3 Diagnostic Tool


Scania VCI 3
WIFI Wireless interface with SDP3 (Scania Diagnose & Programming 3) V2.21 heavy-duty diagnostic scanner is the replacement of the VCI 2. What’s the advantage of the Scania VCI3? Check detail below.
Introduction:
Software version: V2.21
Language: English, German, Spanish, Finnish, French, Italian,Japanese, Korean, Dutch, Polish, Arabic, Portuguese, Russian, Swedish,Turkish, Chinese, Traditional Chinese, Romanian
Operating system: Windows 7 32 bit, Windows 8/8.1 32 bit, Windows 10 32 bit
The Scania VCI3 can be connected to the computer with a USB cable or connection without wire. The VCI3 is preset to run on a direct wireless connection.
NOTE:
Remember that the region in VCI3 is default in Europe. If VCI3 will be used outside Europe, setting the region should be amended.
For more information on the connection options and settings and how to best use the functions in VCI3 and SDP3, see VCI3 Configuration and user instructions under the Help menu in SDP3.
The newest version is 2.31 replaces the version 2.30 before. To be full use the service in SDP3, it is better to update the Scania Diagnosis and Programmer 3 version to v2.31.
Highlight:
1) NO WIRE CONNECTION
2) VCI3 connect to wireless
3) Connect and disconnect the wireless connection VCI3 using the menu item
4) Connect VCI to wireless or Disconnect VCI wireless in SDP3.

When VCI3 interface is connected to the vehicle or engine via the OBD connector, the Scania VCI3 creates a network called VCI3_SN ecc_network.
Follow the instructions below. It can take 30-60 seconds to complete each step.
1. Connect your computer to VCI3 network through the Network icon in the field of status in Windows.
2. Start SDP3 software.
3. Select Connect to VCI wireless connection in the SDP3 menu.
4. Click the relevant VCI3 in VCI3s list wireless network and select Connect.
The first time SDP3 connects to a VCI3, the drivers are VCI3 installed on your computer.

  

Posted by luzey88 at 08:42Comments(0)TrackBack(0)