2018年08月30日

GM TECH2 Scanner Clone

GM Tech2 Scanner china with multi-languages, TIS2000 Programming CD, CANDI interface, update via 32MB Card, multi car model software to choose,Support GM,SAAB,OPEL,SUZUKI,ISUZU and Holden. One GM Tech II Scanner can be used on all GM vehicle applications.

GM Tech2 Professional Automotive Diagnostic Tools for GM vehicles.It supportsall GM systems from 1992 to 2014.


GM Tech2 Scanner specification:
1) Dimensions: 12
2) Microprocessor: 32 bit,16 MHz
3) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4) Communications: Integral RS232 communication port.
5) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)


GM Tech2 Features:
1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.


For GM
For GM-English 33.004 1991-2014 (Newest software)
For GM-Germany 32.007 1991-2013
For GM-Spanish 32.008 1991-2013
For GM-Italian 32.006
For GM-Japanese 32.006 1991-2013
For GM-French 32.008 1991-2013
For GM-Thai 32.008 1991-2013
For GM-Dutch 32.006
For GM-Portuguese 32.008 1991-2013
For GM-Korean 32.008 1991-2013

For OPEL
For OPEL-English 1997-2014 165.000 (Newest software)
For OPEL-Italian 133.001 1997-2012
For OPEL-Germany 85.001 1997-2008
For OPEL-Spanish 91.001 1997-2009

For SUZUKI
For SUZUKI-English 01.210.020

For SAAB
For SAAB-English 148.000 1998-2013

For ISUZU
For ISUZU-English 107.021
CAN-BUS: 2010- (CAN-BUS support car models after 2010)
K-line: 1996-2011 (K-line support car models from 1996 to 2011)
(Please select one: CAN-BUS or K-line)

For Holden
For HOLDEN-English  149.000 1999-2013


Tech2 Vehicle CAN Interface:
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)


For more information,please please visit our website www.cnautotool.com
  

Posted by luzey88 at 16:25Comments(0)TrackBack(0)

2018年08月24日

CAT CommuniCATion Adapter

How to Update the Communication Adapter II Firmware to SIP
NOTE: Use the Auto Diagnostic tool Comm Adapter II Toolkit version 1.1, 1.93 or greater drivers to update the Comm Adapter II.

NOTE: Only use the serial port to upgrade the Comm Adapter II, do not use the Parallel port.

Instructions

To update the CAT ET Firmware, perform the following steps:

Step 1 Make sure the Comm Adapter II is connected to the PC and powered light is on.

Step 2 Go to the Start menu on your computer. Choose Programs -> Caterpillar Comm Adapter II -> Comm Adapter II Toolkit.

Step 3 The Toolkit application will start up and display the Summary screen.

Step 4 Choose the Application Firmware Flash icon (middle icon). The Select Firmware Flash File dialog box displays.

Step 5 You should see these files listed on the left:
ca2v1i0.apf – v1.0 application firmware
ca2v1i1.apf – v1.1 application firmware
ca2v1i1b1.apf – v1.1-B1 application firmware
ca2v2i2.apf – v2.2 application firmware
ca2v2i2_26.apf – SIP application firmware
Note: Caterpillar Communication Adapter (7X1701) does not support J1939 data link.

Step 6 Highlight the ca2v2i2_26.apf file and press the OK button.

Step 7 Press the Begin Flash button to start the download

Step 8 A dialog box showing the download progress will appear. The download should take less than 1 minute.

Step 9 The protocol lights on the front of the Comm Heavy Duty Diagnostic tool Adapter II will all flash while flashing the firmware.

Step 10 When the download is complete, a dialog box will appear allowing you to return to the Summary screen, the Flash screen, or Exit.

Step 11 Press the Exit button. For further details on the Toolkit application and the Application
Firmware Flash process, please refer to the Communication Adapter II User’s Manual.
  

Posted by luzey88 at 22:23Comments(0)TrackBack(0)

2018年08月22日

K518ISE Features

K518ISE Key Programmer Update Announcement:

Toyota Series:
84 Smart Key
2007 Crown Key
Alphard Add Smart Key
2006 Reiz
Crown 68 chip all lost

Hyundai Series:
2013/2015 Verna Remote
2009 Rohens Add Smart Key
2014 Sonata 8 Communication
2014 IX25 Smart Key All Lost

Honda & Nissan Series:
Honda Accord 9th key
2017 Nissan Teana 4A Transponder

Lonsdor K518ISE Key programmer Special Features:
Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost - via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
16 -New Maserati: smart key programming
16 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming

Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.


Note: K518ISE is still under rapid upgrading, more functions and be released soon, please refer to our website
www.cnautotool.com foalso you can “One key update” for the latest version by yourself.

  

Posted by luzey88 at 17:15Comments(0)TrackBack(0)

2018年08月20日

BMW ICOM Programming Tool


There is a new BMW ICOM A2 come out. This new icom A2 add a new function, it is with wifi,
This is very convenient when you use the BMW ICOM A2 machine (CnAutotool.com) . in addition , it is the latest version 2018.07.

This bmw icom machine support multi-language, you can choose the language you want . and we can set the special language for you . English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Chinese, Japanese, Korean and Thai.

BMW ICOM A2+B+C Special Features Compared with ICOM:
1. The modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.
2. Robust aluminium case will help to avoid damage when using in harsh environments.
3. To protect the MOST connector, the ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.
4. The ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the ICOM A2 and makes storage in the engine compartment easier.
5. BMW ICOM A2+B+C support BMW cars till 2013 year. Support BMW & MINI full system diagnose and offline programming.

  

Posted by luzey88 at 16:17Comments(0)TrackBack(0)

2018年08月18日

GM TECH2 Diagnostic Scanner

If you are looking for a GM TECH2, obd2shop is a wise choice.
www.cnautotool.com provide you best price, high quality items and one year warranty with free technique services.



GM Tech2 Description:
The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2011.
Car model supported: GM/SAAB/OPEL/SUZUKI/ISUZU/HOLDEN

Tech2 Specification:
1) Authentic software for GM in the Tech 2 Flash means the most comprehensive diagnostic software available for latest model vehicles for GM.
2) Support for on-board diagnostics on all systems 1992 thru current year for GM.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
9) Vetronix Tech 2 Specifications
10) Dimensions: 12
11) Microprocessor: 32 bit,16 MHz
12) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
13) Communications: Integral RS232 communication port.
14) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

gm Tech2 Features:
1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

The Following GM Vehicles Utilize The CAN Interface
05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)

GM Tech2 Package List:
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(Candi) and instruction sheet download (199.2 kb)
RS232 cable and user manual
RS232-DB9 adapter
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case


Please Kindly Notice:
1. It Can Only Support 12V Cars, No Trucks
2. One Device only Has One 32MB Card As Default, If You Want do more vehicles, Please Buy Additional 32MB Memory Card
3.The TIS2000 including is without usb key version, please need buy the usb version ( Item SO01 and SO01-B) in our website  

Posted by luzey88 at 17:09Comments(0)TrackBack(0)

2018年08月13日

Autel MaxiSys Pro MS908P




Autel MaxiSys Pro itself has already supported ECU programming function for BENZ and BMW cars, if you need to get support for more car models, you must use J2534 device along with OEM software to implement this function. J2534 DEVICE can not only use with AUTEL MAXISYS Pro (Autel Diagnostic Scanner), but also can work on other OEM software.

Using additional OEM software, the MaxiFlash Pro can be used as a Pass-Thru diagnostics tool as well, which allows users to read and clear Diagnostic Trouble Codes (DTCs) and data log PIDS, collect sensor data and log generic OBDII data etc.


AUTEL MaxiSYS Pro MS908P Software Advantage:
Open source Android Operating System for fast boot-up and multitasking
Easy and intuitive navigation makes finding what you need simple and fast
Displays live data in text, graph and analog for easy data review and analysis
Configure live data display options, set alarms, record, and playback data frames with one touch
Records and playbacks live data to pinpoint troubles of sensors and components
Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
Remote technical support for convenient demonstration, training and increased customer satisfaction
Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles
Prints out recorded data anytime and anywhere with Wi-Fi technology

AUTEL MaxiSYS Pro MS908 Pro FAQ:
Q1:Can I use it to do gearbox programming of the Toyota MMT and Mitsubishi?
A1:Sorry, it can not.
Q2: Can I connect the MaxiSYS Pro MS908P with my car in other way? Such as
the bluetooth. Or I can only connect through the cable?
A1:The device include one Ipad with one diagnostic box. The diagnostic box
communicate with the Ipad by bluetooth. But diagnostic box need to connect cars by cable or connector.
Q3: Can I use the AUTEL MaxiSYS Pro MS908P to program the ECM module?
A3: Some cars can do. Some cars can not.
Q4: What is the difference between the AUTEL MaxiSys MS908 and the AUTEL
MaxiSYS Pro MS908P?
A4:AUTEL MaxiSYS Pro MS908P can do the programming function, while the
MS908 can not.  

Posted by luzey88 at 16:45Comments(0)TrackBack(0)

2018年08月12日

CAT Caterpillar ET Diagnostic

CAT Caterpillar ET Diagnostic Adapter retrieve engine totals for fuel used, miles traveled, and hours Operated. CAT Caterpillar ET Diagnostic Adapter display status of all parameters, such as engine speed, Throttle position, timing advance, fuel flow, etc.

The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.

Languages currently supported: Danish, English, French, German, Italian, Japanese, Portuguese and Spanish.

CAT ET 2 Heavy Duty Diagnostic function:

1. Display "Logged Event Codes" to show engine over speeds, High temperatures, fuel consumption, etc.
2. View ECM’s current configuration and change user settings
3. Perform diagnostic tests and calibrations, and calibrate
4. Electro-mechanical and electro-hydraulic components
5. Context sensitive help leads operator through every task Cat ET can perform
6. Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.

Functionalities Shows all operating conditions that cause high repair costs such as:
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator

Cat "ET Trainer" is now included in ET Program. It allows Users to train and practice using Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.

Specification:

1. ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3. Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4. Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5. To help dealer identify problems without visiting machine.
6. Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Shows when problem occurred and how often it happened.
7. Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubleshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the "How To" around the software.

Software:

(1) Designed to run with Microsoft Windows XP
(2) Ready to use, just install software program onto PC using provided CD

Package list:

1 x CAT Adapter II main unit
1 x USB cables
1 x Diagnostic cable
1 x Software CD (diagnostic program Caterpillar ET 2010)   

Posted by luzey88 at 12:04Comments(0)TrackBack(0)

2018年08月06日

BMW ICOM Programming Tool



Recently there is a new product at www.cnautotool.com ,it is NEW BMW ICOM A3 Diagnostic & Programming Tool, Compared with BMW ICOM,The modified BMW ICOM A3 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments. Following is the highlights of A3.

The Highlights of BMW ICOM A3:

1. Support Multi-language: English, German, Chinese
2. BMW ICOM Software Version:
ISTA-D:3.48.10
ISTA-P: 3.55.0.100

3. BMW ICOM A3 Hardware Version: V1.37
4. Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
5. Support BMW All Series Diagnose and Programming
6. Have Both Hardware and Software in the Package, 500GB Complete New HDD, High Quality, Save Money for You than Buying Them Alone
New BMW ICOM A3 BMW ICOM 2015.2V Software For Lenovo & Dell

Features:
1. The heat dissipation is better.
2. The stronger stability.
3. Increase the OBD2 line. Connect better.
4. The shell is more strong
5. Small, lightweight, prolong service life.

BMW ICOM A3 Package List:

1pc x BMW ICOM A3 Interface
1pc x BMW ICOM B Most
1pc x USB Cable
1pc x OBD2 Cable
1pc x LAN Cable


  

Posted by luzey88 at 12:59Comments(0)TrackBack(0)

2018年08月06日

CAR FANS C800 Feature

CnAutotool.com share you car list of the CAR FANS C800 Heavy Duty Truck Tools CAR FANS C800 Truck Scanner .CAR FANS C800 is the 2018 latest heavy duty scanner which is fully optimized based on the OEM scanner.

CAR FANS C800 Feature:
1.Wide Vehicle Coverage: CAR FANS C800 support 35 Heavy duty brand, 21 BUS Brand, 16 Passenger car Brand, 32 Machinary vehicle brand and 46 ECU System, almost cover all brand heavy duty vehicles in market
2.Powerful function of software: C800 is fully optimized based on the OEM scanner, which enhances the comprehensive diagnostic capability of the diesel vehicle. Some of the functions are based on the advanced technology accumulated by the R & D team for many years. The main diagnostic functions include reading the version information, reading/clearing the fault code, actual values, actuators, advanced function
3.Fashionable design of hardware: 7 inch 800 x 480 touch screen, super light main unit, is easy to hold and operate. ARM9 CPU with 4GB memory, the software operation is faster than similar tools
4.Advance Functions: Adjustment/Settings, Function Test, Special function, calibration.
5.Online Updating: Log in the official website (www.carfans.net.cn) download and install the C800 intelligent diagnostic device upgrade client software, the device SD card through the card reader plug in the computer USB interface to complete the device software upgrade.  

Posted by luzey88 at 00:02Comments(0)TrackBack(0)

2018年08月02日

Caterpillar ET 2018A Function


2018A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2018A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2018.

Heavy Duty Diagnostic Caterpillar ET Software 2018A Function:

This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application

Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it's best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)  

Posted by luzey88 at 17:02Comments(0)TrackBack(0)