2019年03月29日

Lonsdor K518ISE

A quick demonstration of Lonsdor K518ISE programming key for 2005 Ford Focus in two minutes. And for more auto key programming,check hereautomotive key programming cases.
lonsdor-k518ise-key-programming-on-a-ford-focus-1
This is the Ford with this key the HP 100 101, sorry not the Tibbe key.
lonsdor-k518ise-key-programming-on-a-ford-focus-2
lonsdor-k518ise-key-programming-on-a-ford-focus-3
It’s very simple to use Car Key Programmer Lonsdor K518ISE.
You see there is a range of other things but we’re just doing this key today.
lonsdor-k518ise-key-programming-on-a-ford-focus-4
So just show you the original key is this one and when you put that in the ignition, turn the ignition on and this light here that’s currently, flashing will go solid and then go out that shows that the system’s working.
lonsdor-k518ise-key-programming-on-a-ford-focus-5
lonsdor-k518ise-key-programming-on-a-ford-focus-6
The new key is this one, it’s been cut ready, switch the ignition on and you see that light goes just flash basically, so it’s not programmed yet.
lonsdor-k518ise-key-programming-on-a-ford-focus-7
lonsdor-k518ise-key-programming-on-a-ford-focus-8
So, go to “Immobilizer“.
lonsdor-k518ise-key-programming-on-a-ford-focus-9
There is a nice search function at the right corner of the machine.
Type F and choose “Ford”, then “China”.
Yes, it does say China, but I’ve tested it quite a few times there’s name of Europe, South America, and anything else, it’s just China here, but it does work under that, so we are gonna go for China.
lonsdor-k518ise-key-programming-on-a-ford-focus-10 lonsdor-k518ise-key-programming-on-a-ford-focus-11 lonsdor-k518ise-key-programming-on-a-ford-focus-12 lonsdor-k518ise-key-programming-on-a-ford-focus-13 lonsdor-k518ise-key-programming-on-a-ford-focus-14
We will see that years the classic focus’s, tap “Type 2”, then “Immobilizer”.
Tap “Add key”, then get message “Downloading application”.
lonsdor-k518ise-key-programming-on-a-ford-focus-15 lonsdor-k518ise-key-programming-on-a-ford-focus-16 lonsdor-k518ise-key-programming-on-a-ford-focus-17
Read message ” Connect device (Lonsdor K518) OBD test cable with the vehicle OBD port, switch ignition one.”, tap “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-18 lonsdor-k518ise-key-programming-on-a-ford-focus-19
Please insert the new key to be programmed. Note: It needs two right keys to start vehicle.
So we are in a certain new key to be programmed which is this new one here, so press “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-20 lonsdor-k518ise-key-programming-on-a-ford-focus-21
Identified number of programmed keys in car:2, select “OK”.
lonsdor-k518ise-key-programming-on-a-ford-focus-22
Programming, please wait…
lonsdor-k518ise-key-programming-on-a-ford-focus-23
Programming complete, successfully programmed key count (2).
lonsdor-k518ise-key-programming-on-a-ford-focus-24
So I’m going to test out because that should have jumped up to free rarely.
Just ignition on, insert back to see if the light goes solid and goes out.
So that’s goes solid and goes out, the key is programmed.
lonsdor-k518ise-key-programming-on-a-ford-focus-25

lonsdor-k518ise-key-programming-on-a-ford-focus-26

And going to check another one, insert into the ignition and to see if the light goes solid and goes out, then the key is programmed successfully.
So they both work. So when it says keys programmed to it must have meant the new key count will be too, so there must have just been just this one key programmed at the time and the other key is gonna be this one the new one. To me that should say free, but it works, the both start the car. So we’re gonna do is pop the key in just test it turn the ignition on, might go solid and goes out, means it’s gonna work it’s a neutral, start the car.
So Lonsdor K518 programmer takes literally less than two minutes to program the key.
lonsdor-k518ise-key-programming-on-a-ford-focus-27 lonsdor-k518ise-key-programming-on-a-ford-focus-28 lonsdor-k518ise-key-programming-on-a-ford-focus-29
CnAutotool.com Official Blog All rights reserved Lonsdor K518ISE programs 2005 Ford Focus key in two minutes
  

Posted by luzey88 at 22:29Comments(0)TrackBack(0)

2019年03月26日

Volvo 88890300 Vocom



Volvo 88890300 Vocom Interface can work with old and new Volvo heavy duty, supports j1708 and j1939, can perform programming etc, Vocom can diagnose Volvo Penta that Volvo VCADS Pro 2.40 can’t.

Volvo VCADS Pro 2.40 is for diagnosing the old Volvo trucks, supports j1708 protocol.

And more below:

Workable vehicle models:

Vocom: Volvo/Renault/UD/Mack Truck

VCADS: Volvo truck

Operation system:

Vocom: requires windows XP/ window7 32bit

VCADS requires windows XP

Info:

How to Install Volvo PTT v2.03 Software with Vocom interface

Laptop required:

Vocom has no limitation on laptop

VCADS can only be supported by Dell 630

Reliable Source of:

Volvo 88890300 Vocom Interface

Vocom-01
  

Posted by luzey88 at 14:53Comments(0)TrackBack(0)

2019年03月25日

Lonsdor K518ISE.

Used to read pin codes for 2014 Jeep Grand Cherokee using Lonsdor K518ISE.

But now i cannot read the pin.

this is the version able to read pin from Grand Cherokee

l(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -1

but now it cannot…

forced to update sw

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -2

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -3

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -4

nothing changed

the machine device info (id, sn)

(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -4 (Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -5 (Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -6

i check alk immo0

nothing as smart 453

immo4 immo5 all
(Solved) Lonsdor K518ise cannot read PIN code from Grand Cherokee 2014 -6

go to the trial apply in the main interface

Trial apply it’s only 90 days

so, now, everything is clear.

In Lonsdor K518S, menus are divided into two parts:

free menus and subscribed menus.

Free menus are free for lifetime.
Subscribed menus can be used for free for 90 days.

You need to pay for them after the trial period. After the trial period, subscribed menus will not work properly if you don’t pay. And the menus will disappear after updating the device.
A. 365 days is a period and the price is USD600 per period. One year period starts from the day of the trial period finished.
B. Purchase menus with a dealer. You can use the menus normally and permanently after payment.
C. Menus which you purchase includes subscribed menus that have been released and that will have been released in one year period.
D. Subscribed menus beyond one year period requires extra payment.

after 90 days’ trial period, click check for updates in one key update, you can use subscribed menus for an extra 90-day period  

Posted by luzey88 at 16:32Comments(0)TrackBack(0)

2019年03月24日

Autel Maxisys Pro MS908P


Problem description:

On Autel Maxisys Pro MS908P or Maxisys Mini, the network connection is fine, but when going to Update page, it says “Network not available, please check the network”.

Solutions:Autel Maxisys MS906

1 Enter Root Explorer/mnt/sdcard/scan/menu and check if there is “init.xml” file. If there is the file, just delete it. Then enter the menu again to make sure if it is deleted successfully.

2.If the network is still not available, please select the Maxisys icon on the main screen. Then hold it and move it to the top where you can see App info, force stop the process of Maxisys and clear the data. Then try to update again.

If cannot solve the problem, send S/N to Autel engineer to check if the scanner is genuine.

Besides, update server is OK, please try to update it again with stable network connection.

Problem description:

When I use the Autel MaxiSys mini MS905, the error message “Unfortunately, maxisys has stopped” on the table.

Solutions:

Just try the following steps:

1 Connect Maxisys mini to PC via USB cable.

2 Turn on USB storage on the msxisys.

3 Wait for several seconds and turn off USB storage.

4 Restart the scanner and try again.
Autel MaxiSys pro MS908P 1 Autel MaxiSys pro MS908P 2 Autel Maxisys MS906
Autel Tools Autel MaxiSys mini MS905, Autel MaxiSys MS908 PRO, Autel MaxiSys MS908P, Autel MaxiSys Pro, Autel Maxisys Pro MS908P, Autel MS908 PRO, Autel MS908P, Autel MS908S PRO, maxisys ms908 pro j2534, maxisys ms908p, Maxisys MS908SP, MaxiSys Pro, MS908 PRO, MS908P, MS908P Pro, MS908S PRO   

Posted by luzey88 at 19:37Comments(0)TrackBack(0)

2019年03月24日

FVDI2


Test report: successfully added a 3-button key card to a Renault Megane III year 2009 using FVDI2 full abrites commander.

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -12

Original key card:

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -13

New key to be programmed

Step 1: Read Pin Code

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -1

fvdi-renault-megane-3-2009-1-1

Choose Key Learning function-> model Megane III X95 2009+

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -2

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -3

Press Start in menu to read key information

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -4

Then Read PIN Code

This is a Megane III, put the key card in ignition lock without starting engine

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -5

Read Pin Code success

Step 2: Learn key with FVDI Renault

Press Learn function

Enter number of keys to be programmed: 2

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -6

Press OK to continue

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -7

Insert key 1 into ignition lock and switch ignition to ON position

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -8

Then insert key 1 and turn ignition to ON position

Key learning in process

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -9

Press OK to save key learning result.

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -10

Turn ignition OFF and then ON

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -11

Key learning success

How to Add Renault Megane 3 2009 PCF7947 Key Card with FVDI -14

Test both keys. Both keys can start car.
Who Viewed This Article Also Views:

1 FVDI2015 FVDI2016 Locked LED Off Softdog Blink Solution
2 FVDI 2018 Full Software Download and Installation
3 FVDI2 Program A New Key on Audi A6 BCM2 When All Keys Lost
4 How to Add VW Touareg PCF7945 Dealer Key with FVDI Clone
5 FVDI 2018 Change Mileage Jetta VDO Instrument
  

Posted by luzey88 at 18:53Comments(0)TrackBack(0)

2019年03月21日

VXDIAG Subaru


VXDIAG Subaru SSM-III Software Version: V2018.04, Support SUBARU Till Year 2018 , it support program new keys , and there have some details as bellow :

Tip and review 1: SSM was the only thing that would program the prox fobs

It is a bit different from most. I make and program keys for a living and for a while the SSM was the only thing that would program the prox fobs. Not true anymore but I still paid less for the VXdiag with software than I would for a single piece of software for my T-code pro. . and there are 3 for Subaru. I have one which only covers the earliest models.



Tip and review 2: SSM talk to everything on the car incl. immo

I have bought SUBARU SSM-III from CNAUTOTOOL , I find it useful as it will talk to everything on the car, including immobilizer systems. . . it emulates the SSM3 and uses cracked SSM software (which is why it’s such a pain to set up). It is *extremely* picky about OS. I wound up having to buy a new(ish) laptop running win7 to get it going. Wouldn’t work with XP or 10.



Tip and review 3: need an immobilizer code to program keys/fobs

You have to have a NASTF LSID or be very good friends with a Subaru parts manager.

You need an immobilizer code (which is VIN specific) to program keys/fobs. It does not change so once you have it for your car you can go nuts. Odds are your dealer would probably give you YOUR immobilizer code if you shop there somewhat regularly. They may charge you for it as I know they have to pay a couple of bucks to mama subie for them.

There’s also an ‘enabling password’ which is also static and I suppose is a very flimsy extra layer of security to protect the immobilizer features of the SSM. It’s 3781.



Tip and review 4: need a code from the dealer

It definitely does more than a regular scanner.

It just depends on if you think having complete access to all the systems in the car is worth it. It’s nice to have when I need it. I had a VDC code that was for the steering angle sensor. Rather than go to the dealer, I just busted out the knock off SSM and calibrated it in the driveway.



More details for your reference :

When you do have a key, there are a variety of ways to program your key fob which are Subaru model specific. In one example, you have to use your lock/unlock buttons on your driver’s side door to input a serial number located inside of your key fob. In another, you have to insert your key in the ignition and turn it on and off before pressing the buttons on your key fob. These sound really simple. But there’s a huge catch. Most of the newer Subaru models can’t be reprogrammed from home. That’s because many of the new Subarus have a proximity key, push button start, and don’t actually use a key at all.

All of these DIY methods require the skill and know-how before you start the process, because they all have to be done very quickly once you start. In the first example, you have to input the serial number using the lock and unlock buttons on your driver side door within 30 seconds of beginning; the serial numbers are about 8 digits long. Then you have to input it again. If the first number is “4” you would press: lock-lock-lock-lock, unlock, and then move on to the next number. So if the first 3 numbers are “412” you would press: lock-lock-lock-lock, unlock, lock, unlock, lock, lock. Though this seems simple, you have to do it exactly correctly two times in a row, within 1 minute total. Talk about stressful!

In the second example, you have to turn your key from the “off” to “on” position in your ignition 10 times within a matter of seconds. Sometimes just turning it to the “on” position to get going down the road is a challenge. All of these methods are only possible on older Subaru models that utilize a key, don‘t have a proximity key, and don‘t have complex technology systems like automatic lift gates.

If you have the patience for any of these methods, there are online tutorial for your specific make and model. Google will help you a lot.

Any interesting for our product , welcome to contact us on www.cnautotool.com

Thank you
  

Posted by luzey88 at 19:02Comments(0)TrackBack(0)

2019年03月20日

Caterpillar SIS

You can install cat sis software following next steps.

1.Unzip iso,find SIS file,install setup.exe
2.Load iszwith virtual drive (Alcohol 120%),and install
3.Load isz,and install
4.Load isz,and install
5.Unzip sis_patch 123file,password is 123,Copy and paste the unzipped files to the SIS installation catalog.(Find SIS on desktop,click right key-file location)
6.Double click SIS icon,prompt to activate.
7.Unzip sis_kg 2013calculator,activate it.
8.Open SIS after activation,first it need load license,put yogocat masterin the desktop,find import user on SIS page.Then load.Choose the file yogocat master ,click √,click import,after jumping interface,click login.
9.Put ID and password to log in.ID:yogocatPASSWORD:master,next page choose cat dealer,agree with it,then you can open SIS homepage.
  

Posted by luzey88 at 18:24Comments(0)TrackBack(0)

2019年03月12日

CaterpillarSIS CAT SIS201805

Caterpillar SIS (CAT SIS) 2018 is illustrated a guide to the maintenance and repair of the full range of CAT vehicles, contains guidance on repair equipment and machinery Caterpillar, program help diagnose production Caterpillar, operating instructions spare parts and equipment Caterpillar.

Repair manual Caterpillar SIS 2018 is intended for engineers and will be useful to all interested in the given direction.

E-program CAT SIS Web allows the owner of specialized equipment to quickly and easily find the required information about the machine because it contains a search function references; helps professionals to calibrate equipment Caterpillar, diagnose it and troubleshoot equipment to solve any problems.

We’re getting a lot of questions about how to work with the CAT SIS

It’s simple and convenient for use. All you need to know is your model name, or serial number, or prefix. Also, you can use Parts search function.

Caterpillar Service Information System is a completely offline product, no matter it works using Internet Explorer Browser (You connected to the local web server, which is being installed on your own PC/Laptop). The technical database for all CAT machinery stored on 19 DVD-DL discs or (iso images or these DVDs). The total file size of CAT SIS setup + Database files is around 100 Gb.

Download / Setup / Activation of CAT SIS 2018

1. Please check that your HDD have enough of free space. We recommend at least 150 Gb for Download and 50 Gb if you prefer get CAT SIS on USB HDD or as a set of DVDs

2. The CAT SIS works only under Windows 7/8.1/10 operation systems. Mac OS, Linux, etc are not supported.

3. Internet Explorer 9-11 is the only Supported browser, because application using WinDjView image plugin, which works with IE only.

4. Setup process estimated time is 1.5 hours if the download and extraction of the setup files have been finished.

5. We recommend to use our Free remote Assistance with Download, Setup and activation. However, if you want to set up the app by yourself, we can send you details instruction guide.

6. If you need to install Heavy Duty Truck diagnostic Scanner CAT SIS on more then 1 PC/Laptop, please contact us, we have some good news for you!

Company Caterpillar – the world leader in construction and mining equipment, diesel and natural gas engines and gas turbines.

The Cnautotool.com also is a leading provider of services provided through the company’s Caterpillar Financial Services, Caterpillar Remanufacturing Services, Caterpillar Logistics Services and Progress Rail Services.

For more than 80 years, Caterpillar Inc. promotes progress possible and driving positive and sustainable change on every continent.
  

Posted by luzey88 at 22:31Comments(0)TrackBack(0)

2019年03月09日

MB SD Connect C6 Benz Scanner

VXDIAG MB SD Connect C6 Benz Diagnostic Tool MB Star C6 Multiplexer With DOIP Functions And V2018.9 MB Star C6 Download Software

VXDIAG MB Star C6 Multiplexer features with same functions as Original Mercedes Benz Xentry diagnosis VCI. MB SD Connect C6 Benz Diagnostic Tool With DOIP and AUDIO Function Better than MB STAR C4/C5. Cnautotool.com VXDIAG MB Star C6 Multiplexer MB SD Connect C6 Benz Diagnostic Tool With DOIP Functions And V2018.9 MB Star C6 Download Software.

VXDIAG MB Star C6 Mercedes Benz Xentry Diagnosis VCI Original MB SD Connect C6 Benz Diagnostic Tool with DOIP&AUDIO Function Perfect replacement MB STAR C4/C5

VXDIAG Benz Star C6 for Xentry diagnosis vci from cnautotool.com highlights:

1.Also called Star C6 Multiplexer, MB Star C6 VCX interface supporting MB Star C4, SD C5 function, performing diagnosis, repairs, program electric and electronic on-board vehicle systems.

2. VXDIAG MB Star C6 Mercedes Benz Xentry Diagnosis VCI from cnautotool.com Support DoIP, cover more functions during SCN Coding than SD C4/C5. Even can turn on hidden features.

3. Same Star Diagnostic & programming (SCN Coding) functionas ORIGINAL DIAGNOSIS VCI

Allow to pay to add any of these car brands: GM, Ford, Mazda, Toyota, Honda, LandRover, Jaguar, Subaru, Volvo, VW and For Porsche

vxdiag Benz Star C6 for Xentry diagnosis Details

Version:

V2018.9 MB Star C6 Download Software from cnautotool.com, it means works with the Mercedes Benz & Smart cars up to 2018 year.

VXDIAG Benz C6 Mux from cnautotool.com Languages:

22 languages in total.
  

Posted by luzey88 at 14:22Comments(0)TrackBack(0)

2019年02月20日

The Cat ET diagnostic tool




CAT Caterpillar ET is an updated version of the dealer level program for the diagnosis of all equipment caterpillar.
This program works with the dealer diagnostic scanner caterpillar Communication Adapter, as well as other adapters for diagnostics including scanner Nexiq; the program provides the full information when troubleshooting.
This diagnostic tool Cat ET allows service technicians to reprogram ECMs, reconfigure control system parameters, fine-tune performance or diagnose the cause of failure for the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately.
When you purchase a program Caterpillar ET (Cat Electronic Technician) , you get detailed and clear instructions on how to activate it. But if you have difficulties or questions concerning the installation, we are helping you to enable the software remotely via TeamViewer free of charge, without any additional fees.

We recommend using only Heavy Duty Truck diagnostic Scanner genuine caterpillar comm III

Cat ET diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ECM settings, for example, speed limit requires factory password. The factory password generator not included in this application

What’s New – cat Electronic Technician
Preferences Option to Save a Product Status Report to PDF

The OBD Scanner Tools vehicle diagnostics Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.  

Posted by luzey88 at 17:28Comments(0)TrackBack(0)

2019年02月19日

caterpillar ET


Cat ET 2017C (caterpillar Electronic Technician) is an updated version of the dealer level program for the diagnosis of all equipment caterpillar.
This program works with the dealer diagnostic scanner caterpillar Communication Adapter, as well as other adapters for diagnostics including scanner Nexiq; the program provides the full information when troubleshooting.
This diagnostic tool Cat ET allows service technicians to reprogram ECMs, reconfigure control system parameters, fine-tune performance or diagnose the cause of failure for the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately.
When you purchase a program Cat ET (Cat Electronic Technician) 2017С, you get detailed and clear instructions on how to activate it. But if you have difficulties or questions concerning the installation, we are helping you to enable the software remotely via TeamViewer free of charge, without any additional fees.

We recommend using only Heavy Duty Truck diagnostic Scanner genuine caterpillar comm III

Heavy Duty Diagnostic Cat ET diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ECM settings, for example, speed limit requires factory password. The factory password generator not included in this application

What’s New – cat Electronic Technician 2017C
Preferences Option to Save a Product Status Report to PDF

The OBD2 vehicle diagnostics Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.
  

Posted by luzey88 at 19:35Comments(0)TrackBack(0)

2019年02月11日

BMW ICOM NEXT Diagnostic Tool


BMW ICOM NEXT Professional Diagnostic Tool with WIFI Function

BMW ICOM NEXT Main Diagnostic Software includes:

BMW ISTA-D (Diagnostic);
BMW ISTA-P (Programming)
BMW Group ISPI (the fourth generation of BMW diagnostic software client);
E-SYS (Engineer Software for F series, available for programming, coding, Chinesization, realize hidden functions, advanced features);
WINKFP (for E series: programming, upgrade and downgrade);
Tool32 (enter key, import codes, delete certification, advanced features of BMW series);
INPA (read vehicle information, diagnosis, read and clear trouble codes);
BMW Coding (for E series: import data, change the code or realize hidden functions);
KSD2 (offer full vehicle repairing information for diagnosis or programming);
NCS-Expert tool (for E series: set codes, realize hidden functions and change settings);
BMW software includes the engineer version, which is the quick and easy diagnostic programming and coding system that German
BMW engineers are using. The system is designed in English and German. The Engineer version is so practical and powerful that it
can achieve professional features which all the original professional computers can realize, can change the language into Chinese
through the OBD port for import cars (Europe regulation cars, the United States and the United States, Africa, etc.).

BMW ICOM NEXT Features:

diagnosis, programming (incl. programming one module only), coding, realize hidden function, new features activation, the module system update.

Software Version : V2018.12
ISTA - D:V4.12.12,with SDP data V4.12.12
ISTA - P:3.65.0.500 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable)
Vin: V2018.08

Following functions can be activated based on the existing configuration model:

01 use the button in the cab to close the trunk (electric tailgate), to terminate the reverse operation at any time (available in cars with the electric tailgate)
02 activate the Bluetooth phone function, to automatically play the music inside the phone every time you start the car. (Available in models with a USB port in the armrest box or gear)
03 support audio and video playback via USB cable as well as via iPod.
04 connect to the phone through the Wi-Fi (mobile phones are required to install software)
05 open the voice recognition function (currently only available in English digital telephone dialing)
06 operate the navigation menu when driving, watch DVD (Even the original car is available with CD, you can also watch DVD)
07 Active internet applications (available in post 2012.09 models with professional navigation, but some unsupported with unclear reasons)
08 immediately fold the rear-view mirror with the remote control (for the original car, owners need to press the lock key for 1.5 seconds)
09 activate gearbox program on the sport cars, at a quicker response for speeding up. But it will cause fault codes in ECU test in the 4S shop. (NOT recommended)
10 effectively prevent rear-end collision because brake lights flash quickly when braking severely (for 3 Series 5 Series, testing)
11 use mobile phone traffic to surf the Internet on iDrive via the phone Bluetooth (not tested yet)
12 adjust the warning speed of changing a lane (available in high-end cars with the rearview mirror with the dead angle warning indicator) (not tested yet)
13 automatically released the handbrake (parking button) when the vehicle is started (testing)
14 add the lane departure system and roadside warning identification function (available in optional cars with front cameras) (not tested yet)
15 L7 around Sound Pro

Personalized Customization:

1. Set Seat Belt Alarm time (second/sec)
2. Disable passenger Seat Belt Alarm
3. Disable driver Seat Belt Alarm
4. Set the engine on/off status the same as that before the ignition off or the default status off.
5. Set the central lock automatically unlock when ignition off
6. Set Fuel Economy Mode as default mode after ignition on
7. Enable roll up window when open car door
8. Enable the option of DRL (Day Running Lights) on or off.
9. Set Highlight auxiliary and intersection traffic light “Automatic”
10. Enable to adjust DRL brightness (the default factory setting is brightest)
11. Set fog light turn on while headlight is on
12. Enable to Lock/Unlock sound and adjust the volume
13. Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
14. Set windshield wiper Back in place when ignition off
15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
16. Set the turn signal light on/off times (F30)
17. Enable CIC menu display CI version
18. Three Bluetooth phone rings available
19. Enlarge phone number and text storage (25 to 50) A/C (Automatic Air Conditioning)
20. Set indoor internal circulation memory the same as that when the ignition off last time.21. Set air conditioning memory the same as that when ignition off last time.
22. Display engine output power and torque on navigation screen
23. Cancel home screen boot delay confirm message
24. Cancel rear view camera statement when reversing
25. Display available gas station on navigation
26. Display speed limit info (Need hardware support)
27. Display engine torque menu
28. Auto headlight
29. TPMS
30. Display tire pressure and temperature (Need hardware support)
31. Adjust mile to kilometer
33. GPS time synchronization
34. Dashboard stimulate instant fuel consumption: change from 20 to 30
35. Enable dashboard light on always
36. Enable dashboard light always on at night (For BMW 535, GT, 7 series and part of BMW 530)
37. Enable dashboard light always on at daytime (For BMW 535, GT, 7 series and part of BMW 530)
38. Enable dashboard lights turn grey (For BMW 535, GT, 7 series and part of BMW 530)
39. Enable dashboard lights turn orange or grey (For BMW 535, GT, 7 series and part of BMW 530)
40. DS Mode display current shift from S1 to S7
41. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)
42. PDC reversing radar is changed vertically and horizontally

Package List:
1 x Whole set of WIFI BWM ICOM NEXT
1 x Whole set of EVG7 Tablet PC
1 x V2018.12 software HDD

  

Posted by luzey88 at 23:20Comments(0)TrackBack(0)

2019年02月10日

Porsche PIWIS Tester III

Porsche Piwis Tester II help me solve an issue

I have a 2006 Porsche Cayenne Turbo S and noticed an odd problem just not too long ago.

Upon heavy acceleration I’ve noticed a “staggering” or “shuddering” situation using the automobile. There’s no rough idle challenges or idle troubles when maintaining RPM’s higher (even in the 4k – 6k variety), but only when I “get on it” and give the automobile some acceleration.

It doesn’t happen in any unique gear also – only when accelerating tough. When the misfires start out occurring, the complete auto (such as cabin) shakes rather violently.

I also have not experienced any transmission certain issues (i.e. higher rpm’s in addition to a mis-shift or really difficult shifts).

When I brought it into the dealer currently, I brought one particular in the tech’s out to take a ride with me. I went by way of and instantly was able to re-create the issue. The repair man connect Porsche Piwis 2 and my car or truck, in the finish on the ride, my verify engine light finally turned on…I was pretty satisfied about this since the dealer was telling me that it’s challenging to acquire Porsche to supply warranty function if there is certainly no verify engine light (is every person else’s knowledge the exact same with dealerships)?

The codes stated that there was a cylinder 6 misfire and the tiptronic transmission flag was also presented. The common procedure from what they told me should be to replace the ignition coils (and certainly it’s around the difficult side to replace – engine torque mount – you name it).  

Posted by luzey88 at 17:00Comments(0)TrackBack(0)

2019年01月29日

Nissan Consult 3 III

Nissan Consult 3 III is a professional and affordable OBDII Diagnostic Tool that specially for Nissan cars from 1996-2011. Consult 3 has launched for ages and already have many good feedbacks about it. And following is one of the customer’s review feedback about Blueooth Nissan Consult 3 III Professional Diagnostic Tool,let’s have a quicker look at.

Top 5 Reasons to Get Nissan Consult 3 Plus:
1. Support Nissan till year 2016

Nissan Consult-3 Plus Software Version : V65.12
Nissan Consult-3 Plus CSP Software Version : CSP V41.10
Nissan Consult-3 Plus Programming Data Version : Pplus_V65.1F

2. Support both diagnostic and programming while if you want to make key programming, still need to buy Security Card for Nissan Consult 3 Plus 3. Multi-Languages: English, Portuguese (Newly Add), French, German, Spanish, Italian, Japanese, Russian, Finnish, Greek, Chinese(Simplified), Chinese(Traditional)
4. Communication Mode: USB 2.0 / Bluetooth
5. Can be installed on Windows XP, WIN7, WIN8 & WIN10

FAQ

Q1: What is the difference among Nissan consult 3, consult 4 and Nissan consult 3 plus? Can Nissan consult 4 remap ECU and change IGN time-limited parameter?
A1:
1) Nissan consult 3 and consult 4 share the same software version and parts, the difference between them is the appearance and the quality;
2) Nissan consult3 plus is the newest-released Nissan diagnostic it supports the Nissan up to 2016 year. And only Nissan Consult 3 Plus can support programming.

Q2: What additional card needed when use Nissan Consult-3 plus to make key?
A2: It need additional card, it needs for making key, this card is Nissan Consult-3 plus Security Card, otherwise the button "Immobilizer key" is gray color and is unavailable.  

Posted by luzey88 at 13:07Comments(0)TrackBack(0)

2019年01月26日

How to choose Vocom




How to choose Vocom for Volvo Renault UD Mack TRUCK diagnosis

Volvo 88890300 Vocom Interface, which one better? Better for the repairing and diagnosis for Volvo, Renault, UD and Mack trucks in the repair shop or field, at the roadside, or during test drives.

YES, you might be confused when you decide to buy a 88890300 Vocom from China. Read all info here for a good choice



Why to use Volvo 88890300 Vocom?
1. covers the whole repair process through the use of plug-ins.
2. can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine.
3. provides functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.

What are functions of Volvo Vocom Interface + PTT software?
Identify a product
View information history
Diagnose a selected product
Test a selected product
Program a selected product
Calibrate a selected product

What’s VOLVO PTT?

Tech Tool (TT) is a tool that supports the repair and diagnostic process. It was developed to make repair shop tasks easier and more efficient. TT can be used in the repair shop, out in the field, at the roadside, or during test drives. TT is a diagnostics application that covers the whole repair process through the use of plug-ins. With TT you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine. TT also provide functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.

Can PTT be activated for free?
FREE activation for PTT 2.03/3.20 for the first time
Usually, PTT needs to pay for activation to use.

How to update 88890300 Vocom software?

go to BUYOBDII.COM to get any version of Product Tech Tool PTT you want to update:

PTT Software 2.03/3.02

PTT 2.04.55

PTT Developer Tool V2.04.85.3

What models can be worked with?
Volvo Trucks (Older electrical system, Vehicle electronics ’98, V2, V3, V4);
Volvo Buses (Conventional, Multiplexed, Multiplexed v2, Multiplexed v3);
Volvo Construction Equipment;
Volvo Penta (VERSION2);
Volvo OEM Component Customer (VERSION2);
Mack Trucks (V-MAC I/II/III, ITC, IV, IV+);
Renault Trucks (VERSION2);
UD Trucks (VERSION2)

What’s the 88890300 Vocom package?
1pc x 88890300 Vocom Interface
1pc x OBD2 Cable
1pc x 8pin Cable
1pc x 14pin Cable
1pc x 12pin Cable for Renault trucks
1pc x USB cable
1pc x PTT 2.03.20 Software DVD  

Posted by luzey88 at 10:48Comments(0)TrackBack(0)

2019年01月23日

Autel Maxisys Pro MS908P

Autel MaxiSys Pro MS908P Hardware:
1.Extraordinarily powerful Cortex-A9 quad-core processor
2.9.7” 1,024x768 LED-backlit glossy Multi Touch capacitive display with IPS technology
3.Internal reliable and fast 32GB Solid State Drive for better performance
4.Built-in 5-megapixel rear camera with autofocus and flashlight
5.Dual-band (2.4 GHz & 5.0 GHz) 802.11n Wi-Fi to access your favorite web resources
6.Unique shop tough ergonomic design features strong rubber protection and housing;
7.Built-in rechargeable lithium-ion battery for up to 8 hours of continuous operation
8.USB, audio and auxiliary ports make it easy to connect accessories
9.The VCI connects wirelessly to the main unit with Long-Range Class 1 Bluetooth


Autel MaxiSys Pro MS908P Software:
1.Open source Android Operating System for fast boot-up and multitasking
2.Easy and intuitive navigation makes finding what you need simple and fast
3.Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes
4.Complete function capability for codes, live data, actuation tests, adaptations, coding, and even ECU programming
5.Displays live data in text, graph and analog for easy data review and analysis
6.Configure live data display options, set alarms, record, and playback data frames with one touch
7.Records and playbacks live data to pinpoint troubles of sensors and components
8.Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
9.Remote technical support for convenient demonstration, training and increased customer satisfaction
10.Prints out recorded data anytime and anywhere with Wi-Fi technology
11.Automatic Wi-Fi updates available in new software releases


Software advantage:
1.Open source Android Operating System for fast boot-up and multitasking
2.Easy and intuitive navigation makes finding what you need simple and fast
3.Displays live data in text, graph and analog for easy data review and analysis
4.Configure live data display options, set alarms, record, and playback data frames with one touch
5.Records and playbacks live data to pinpoint troubles of sensors and components
6.Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
7.Remote technical support for convenient demonstration, training and increased customer satisfaction
8.Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles
9.Prints out recorded data anytime and anywhere with Wi-Fi technology


Maxisys Pro Specification:
1.Operating System:AndroidTM 4.0, Ice Cream Sandwich
2.Processor:Samsung Exynos Quad-Core Processor 1.4GHz
3.Memory:2GB RAM & 32GB On-board Memory
4.Display:9.7 inch LED capacitive touch screen with 1024x768P resolution
5.Connectivity:Ethernet: RJ45 Ethernet Connection,Cellular: 3G/4G module: WCDMA
6.Camera (rear):Rear-facing, 5.0 Mexgapixel, AF with Flashlight
7.Sensors:Gravity Accelerometer, Ambient Light Sensor (ALS)
8.Audio Input/Output:icrophone, Dual Speakers, 4-Band 3.5 mm stereotype/standard headset jack
9.Power and Battery:11000 mAh 3.7 V lithium-polymer battery, Charging via 12 V vehicle power
10.Input Voltage:12 V (9-24 V)
11.Power Consumption:6.5 W
12.Operating Temperature:-10 to 55 (14 to 131 )
13.Storage Temperature:-20 to 77 (-4 to 158 )
14.Housing:Strong plastic housing with protective rubber boot


Autel MaxiSys Pro MS908P Package List:
1. Main part
Quick reference guide
Lighter Fuse
Main cable
Protective carrying case
USB Cable
User’s Manual
Cigarette Lighter
Compact Disc (CD)
AC/DC External Power Adapter
Clipper Cable
Capacitive Stylus Pen
Soft Cloth
Packing List
Mini USB Cable
Ethernet Serial Cable
MaxiFlash Pro
2. Adaptor
GM/Daewoo-12 adaptor
PSA-2 adaptor
Fiat-3 adaptor
Audi-2+2 adaptor
BMW-20 adaptor
Benz-38 adaptor
Kia-20 adaptor
Mitsubishi/Hyundai-12+16 adaptor
Nissan-14 adaptor
Honda-3 adaptor
Chrysler-16 adaptor



Autel MS908S PRO can do online programming, at the same time it's compatiable for diagnosis and online programming for part of the original software.
If you have problem with the price can contacct with us: sale@cnautotool.com   

Posted by luzey88 at 14:22Comments(0)TrackBack(0)

2019年01月16日

Newest Volvo 88890300


For Volvo 88890300 Vocom Interface is a diagnostics application that covers the whole repair process through the use of plug-ins. For Volvo 88890300 Vocom Interface you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine. For Volvo 88890300 Vocom Interface also provide functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.If you have any question. Please feel free to contact me from www.cnautotool.com.




Vocom Interface Description:
Volvo 88890300 Vocom Interface is a diagnostics application that covers the whole repair process through the use of plug-ins. With Volvo 88890300 Vocom Interface you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine. Volvo 88890300 Vocom Interface also provide functions for updating the tool, communication with the product, and other external applications. The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.If you have any question. Please feel free to contact me.


Supported companies and electrical systems:

For Volvo Trucks (Older electrical system, Vehicle electronics '98, V2, V3, V4);

For Volvo Buses (Conventional, Multiplexed, Multiplexed v2, Multiplexed v3);

For Volvo Construction Equipment;

For Volvo Penta (VERSION2);

For Volvo OEM Component Customer (VERSION2);

For Mack Trucks (V-MAC I/II/III, ITC, IV, IV );

For Trucks (VERSION2);

UD Trucks (VERSION2)






For Volvo 88890300 Vocom Interface Functions:

Identify a product.

View information history.

Diagnose a selected product.

Test a selected product.

Program a selected product.

Calibrate a selected product.







Package list:

1 pc x 88890300 Vocom Interface

1 pc x OBD2 Cable

1 pc x 8pin Cable

1 pc x 14pin Cable

1 pc x 12pin Cable for trucks

1 pc x USB cable

1 pc x PTT 1.12/Vcads 2.43 Software DVD  

Posted by luzey88 at 18:16Comments(0)TrackBack(0)

2019年01月11日

FAQ of BMW ICOM A2+B+C


BMW ICOM A2+B+C Special Features Compared with ICOM :
* The modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments.
* To protect the MOST connector, the ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.
* The ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the ICOM A2 and makes storage in the engine compartment easier.



Notice of BMW Diagnsotic Tool:
1.No Network And Also No Connection With The Original Server When You Use The BMW ICOM Software HDD, Ortherwise It Is Will Be Damaged, And Need You Send Back For Repair
2.If your BMW ICOM HDD got error "database version mismach, the found database version are not compatible", just need to set the ISTA/D language as American English

FAQ of ICOM A2:

Q1: Is there any diagnostic equipment can do BMW530 DA 2003 ? It is better in French
A1: Try to use the BMW ICOM A2

Q2: Does the BMW ICOM A2 have the installation manual?
A2: Inset the hard disk into the computer and input password BMW, you’ll find the installation manual.

Q3: BMW ICOM A2 (SP168-B) can do the BMW old car before 2000?
A3: You can do the old BMW car, if the car can not be done, then try for a few more cars

Q4: 2013 New BMW ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A4: Yes The entire vehicle control unit can be programmed   

Posted by luzey88 at 18:53Comments(0)TrackBack(0)

2019年01月11日

Porsche Piwis III FAQ

Porsche Piwis III FAQ:
Q: Can Porsche Piwis III V37.250.020 perform all the functions of Porsche Piwis II?
A: Yes, Porsche Piwis III is compatible Porsche Piwis II, that means III includes all the functions of Piwis II.

Q: Can Piwis II update to Porsche Piwis III V37.250.020?
A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: How to update Piwis III V37.250.020?
A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually the software updates 1-2 times per year.

Q: Can I use my personal computer?
A: No, the computer and the device is bound together. Because The Piwis III V37.250.020 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.

Q: Why need Piwis III V37.250.020?
A: Because Piwis II can't work with the Porsche after 2017 year. Only Piwis III V37.250.020 can .

Q: It program IMMO & Key online?
A: Yes.

Q: Does it support Wifi?
A: Usually, the device is offline version and WIFI is disabled so that you don't need to active every 15 days.
If you have the online account and want to use our Vxdiag Piwis III, then we can enable the Wifi and you will active the software every 15 days.

Q: Can Piwis III connect to the internet?
A: Yes. It is allowed.  

Posted by luzey88 at 15:42Comments(0)TrackBack(0)

2019年01月05日

Autel MaxiSys pro MS908P




Autel Maxisys Pro MS908P would be the fantastic solution for automobile fix retailers and technicians. Autel MaxiSys MS908 pro diagnostic resource help Automatic WiFi updates obtainable in new application releases, extensive automobile protect for additional than eighty car products, together with: United states of america, Asian and European auto can make. Maxisys MS908 scanner can screen live information in exam, graph, analog and electronic gauge for simple data evaluate and examination.

Do you know Difference between Autel MaxiSys MS908 and MaxiSys Professional MS908P scanner.
1.The two Autel MaxiSys MS908 and MaxiSys Professional MS908P scanner are Autel MaxiSys Automobile Analysis Process.
2.Both Autel MaxiSys MS908 and MaxiSys Professional MS908P scanner developed significantly past the initial capabilities of MaxiDAS Ds708.
3.The two Autel MaxiSys MS908 and Autel MaxiSys Professional MS908P scanner from CnAutotool.com are MaxiSys Auto Communication Interface(VCI) coupled with the best possible protection of OE-level diagnostics.
4.Each Autel MaxiSys MS908 and Autel MaxiSys Pro MS908P scanner run on Android Operating Method.

ICarScan VCI Awareness is ability Safeguarded AND RESERVE The power Inside of your Motorized vehicle. You could pay money for lots of people today that have very fast autos but there’s a constrained amount which have been not satisfied which has a inventory automobile to make sure that they struggle Car or truck Tuning distributors specializing in setting autos apart aesthetically as well as in common typical performance smart. Practically yearly progressively a whole lot a great deal more individuals swap their autos into tuner autos and therefore you can find a number of blogs masking Tuning News.


Start iCarScan may be the substitution of Start X431 iDiag vehicle diagnostic scanner.Start iCarScan come with the five Manufacturer auto software program without spending a dime,you can decide on anybody you would like.Multi-language Launch iCarScan VCI help Bluetooth and might be up-to-date on line.Obd2repair have Start iCarScan Launch iCarScan VCI scanner with five Manufacturer automobile application for free launch.  

Posted by luzey88 at 22:52Comments(0)TrackBack(0)